Fujitsu Siemens Computers Pocket LOOX 600 - Manual (Page 40)

Pocket LOOX 600 in mobile use Information on transport and travelling
32 A26391-K120-Z120-1-7619
Connecting Pocket PC directly to power adapter
i
In the following text the letters after the designations for the various cables refer to the
illustration
Delivery scope in your "Getting Started“ manual fold-out cover page). Please
look there if you're not sure which cable is meant.
Ê Connect the power adapter cable to the DC socket of the Pocket PC (25).
Ê Connect the power cable (B) into the power adapter (C).
Ê Plug the power cable (B) into a mains outlet.
The integrated battery of your Pocket PC will be recharged.
Optimising battery performance
When you have completely charged the battery, you can operate the Pocket PC for up to 15 hours
without a power connection. However, it is not possible to exactly specify the maximum operating
time, as different applications use more or less energy.
In the system settings you can make settings that help you save energy when using your
Pocket PC. These settings enable you to use the battery operating time optimally. Please see the
chapter "Configuring Pocket LOOX 600“ for information on how to save energy.
i
In the default setting, a setting is activated that automatically switches the Pocket PC into
the Suspend mode after three minutes when working without a power connection if no
entries are made during this time. You can switch on the Pocket PC again at any time by
briefly pressing the Suspend button and then continue working where you left off.
Checking battery charge level
You can display the battery charge level under Start – Settings - Power Supply .
Information on transport and travelling
Transporting Pocket LOOX 600
·
Remove all data carriers (e.g. memory cards) from the slots.
·
Switch the Pocket PC into the Suspend mode.
·
Pull the power plug of the power adapter and all peripheral devices out of the electrical outlets
if necessary.
·
Disconnect the power adapter cable and the data cables of all peripheral devices.
·
If the device needs to be shipped, use the original packaging or other suitable packaging to
protect it from damage caused by mishandling.
·
Use the bag for the Pocket PC, which protects against jolts and impacts, for transport.
Protect the Pocket PC from severe shocks and extreme temperatures (e.g., direct sunlight in a car).