Fujitsu Siemens Computers Pocket LOOX 600 - Manual (Page 52)

Configuring Pocket LOOX 600
44 A26391-K120-Z120-1-7619
Permitting sound only for certain actions
Ê Touch Start.
Ê Select the Settings entry in the menu.
Ê Select the Personal tab.
Ê Touch the Sounds & Messages symbol.
Under the heading Activate sound for you will find a list of actions that are usually assigned acoustic
signals. You can select yourself which applications or functions are to be accompanied by sounds.
Ê Touch in an empty control and selection box to mark it.
Ê Touch in a marked control and selection box to remove the marking.
Ê Touch OK (navigation bar) to confirm your setting.
Configuring hardware buttons
The buttons of your Pocket PC are assigned certain functions such as running programs. For
example, the sound recording button opens a recording window in the
Notes program.
However, you can change these default settings and assign the buttons the functions of your
choice.
Ê Touch Start.
Ê Select the Settings entry in the menu.
Ê Touch the Buttons symbol on the Private tab.
A list of the hardware buttons and the assigned programs or functions appears. The four application
buttons appear in the list twice. This is because you can assign different applications to these
buttons for short and for long keystrokes.
Ê Mark the button in the list for which you want to change the assignment.
Ê Select the program you want to assign to this button from the list below it.
Ê Touch OK (navigation bar) to confirm your setting.
The button is now assigned the desired program.
If you want to change the function of several buttons, we advise you to make a note of the new
functions.