FUJITSU MAM3184MC/MP - Manual (Page 39)

C141-E134-01EN 3 - 3
Table 3.1 Zone layout and track capacity
Cylinder
Zone
MAM3367 series MAM3184 series
Byte/track Sector/track
0 0 - 1,240 355,720 518
1 1,241 - 2,481 355,720 518
2 2,482 - 3,722 355,719 518
3 3,723 - 4,963 355,721 518
4 4,964 - 6,004 354,440 516
5 6,005 - 7,025 351,319 511
6 7,026 - 7,746 349,760 509
7 7,747 - 8,987 340,320 504
8 8,988 - 9,848 336,879 490
9 9,849 - 10,909 331,719 483
10 10,910 - 12,070 326,200 476
11 12,071 - 13,391 315,240 462
12 13,392 - 14,612 306,760 448
13 14,613 - 15,653 298,760 434
14 15,654 - 16,302 294,400 427
15 16,303 - 17,431 283,880 420
16 17,432 - 17,944 279,960 406
17 17,945 - 18,749 17,945- 18,785 269,120 392
Note: When the logical data block length is 512 bytes, the sector/track capacity indicates above amount
(1) User space
The user space is a storage area for user data. The data format on the user space (the length of data
block and the number of data blocks) can be specified with the MODE SELECT or MODE
SELECT EXTENDED command.
The default value of cylinders in the user space is MAM3367 series = 18,754, MAM3184 series =
18,786. These also equal the maximum cylinders number for each series. The user can also
specify the number of logical data blocks to be placed in the user space with the MODE SELECT
or MODE SELECT EXTENDED command. When the number of logical data blocks is specified,
as many cylinders as required to place the specified data blocks are allocated in the user space.