FUJITSU MAM3184MC/MP - Manual (Page 57)

C141-E134-01EN 4 - 5
e) Must be handled on an anti-static mat.
Figure 4.4 Mounting frame structure
(2) Limitation of side-mounting
Mount the IDD using the 4 screw holes at the both ends on the both sides as shown in Figure 4.5.
Do not use the center hole by itself.
In case of using the center hole, it must be used in combination with 2 holes on both ends.
(Total 6 screws for 6 holes enclosed)
Use four holes (No.1-4) to mount.
Holes for
mounting
screw
Centor
holes
Holes for mounting screw 1
2
3
4
Figure 4.5 Limitation of side-mounting
(3) Limitation of bottom-mounting
Use all 4 mounting holes on the bottom face.
6.35 or less
6.35 or less