Force10 Networks PSeries 100-00055-01 - Manual (Page 114)

114 Appendix A
pnic vlan-remove-disable
Disable the VLAN Tag Remove feature.
Syntax
pnic vlan-remove-disable
Default The VLAN Tag Remove feature is disabled by default.
Command
History
Usage
Information
This feature is enabled and disabled on both sensing ports.
Example Figure 82 pnic vlan-remove-disable Command Example
[root@localhost pnic]# pnic vlan-remove-disable
No card number specified. Assuming card 0
*** Disabling VLAN tag remove on card:0 channel 0&1 successful.
[root@localhost pnic]#
pnic vlan-remove-enable
Remove the VLAN tag and recalculate the CRC on all tagged packets passing through the
appliance.
Syntax pnic vlan-remove-enable
Default The VLAN Tag Remove feature is disabled by default.
Command
History
Usage
Information
This feature is enabled and disabled on both sensing ports.
Example Figure 83 pnic vlan-remove-enable Command Example
[root@localhost pnic]# pnic vlan-remove-enable
No card number specified. Assuming card 0
*** Enabling VLAN tag remove on card:0 channel 0&1 successful.
[root@localhost pnic]#
Version 2.3.1.2 Introduced
Version 2.3.1.2 Introduced