Force10 Networks PSeries 100-00055-01 - Manual (Page 31)

P-Series Installation and Operation Guide, version 2.3.1.2 31
To select firmware:
Figure 18 Manage Firmware GUI
fn9000015
Runtime Statistics
Runtime statistics are displayed when firmware is uploaded, and traffic is flowing across the appliance.
The GUI presents two views of traffic statistics. The default view shows the total statistics for Channel 0
and 1, as shown in
Figure 19 . Enter the command
p
to view traffic statistics for both channels separately or
as a sum, as shown in Figure 20 . Use the command p to toggle between the two views.
• The first line shows the device number, type of device, firmware ID, and version number.
• The second line shows the status of the Ethernet interface and direct memory access (DMA), and the
values of Flow Timeout, Packets/Flow, and IRQ Period. These parameters can be adjusted using the
GUI commands described in
Table 3 .
Step Task
1
Enter the m command from the GUI command line (see “GUI Commands” on page 26 ) to access the main
rule management GUI.
2 Select
Manage Firmware (see
Figure 18 ).
3 Use the arrow keys to highlight the desired firmware and the
Select option, and press the Enter key. See
“Firmware Filename Description” on page 62 for information on identifying firmware by their filenames.
4 Confirm your selection, and exit the GUI.