Pnic capture-off, Pnic capture-on – Force10 Networks PSeries 100-00055-01 User Manual
Page 83
P-Series Installation and Operation Guide, version 2.3.1.2
83
pnic capture-off
Disable the capturing of packets via direct memory access (DMA).
Syntax
pnic capture-off
Parameters
Command
History
Example
Figure 44
root@# pnic macrewrite-on 0
No channel number specified. Assuming channel 0
*** Enabling MAC rewrite on card:0 channel:0 is successful!
[root@localhost SW]# pnic capture-off
No card number specified. Assuming card 0
Capture OFF set successful.
[root@localhost SW]#
pnic capture-off Command Example
Usage
Information
Turning off capturing might be desirable during traffic mirroring or pure filtering applications
where the host is only used for control.
Related
Commands
pnic capture-on
Enable the capturing of packets via direct memory access (DMA).
Syntax
pnic capture-on
Parameters
Command
History
number
Enter the number of the network interface card.
Range: 0-5
Default: 0
Version 2.3.0.0
Introduced
Enable the capturing of packets via direct memory access
(DMA).
number
Enter the number of the network interface card.
Range: 0-5
Default: 0
Version 2.3.0.0
Introduced