Global Technology Associates SOFTWARE FIREWALL GBWA200501-01 - Manual (Page 19)

2 – Installation 15
Note
USB pen drives may appear, but should not be selected for
installation as they are not IDE-bootable devices. CD-ROM or DVD-
ROM drives will not be displayed by the GB-Ware system installation
process, as they are not writable discs. Other drives will not
display.
Device Designations
Designation Description Device Geometry*
da0 USB storage device
(Generic storage
device) [978/4/32]
ad0 IDE storage device
(with device manufac-
turer identification) [978/4/32]
*If there is an indication of the device size in the description, this
can be used to help identify the correct drive. Device Geometry
format is in cylinders/heads/sectors.
Once you have selected the desired device, press tab to
OK
, then press the
SPACE BAR
or
ENTER
to continue.
Caution
Carefully select the correct storage device, especially when using
a USB Compact Flash reader/writer to install GB-Ware on a separate
system. Installing GB-Ware on the wrong device will overwrite the
disk (e.g. selecting the system hard drive will overwrite your operating
system or other data, destroying it). You may wish to disconnect
non-GB-Ware hard drives before installing to prevent accidental
erasure.
Installation Device Selection
Installing the Runtime
The next dialog will display the warning: Installing will destroy any
existing data on <device number>!!! Are you sure you want to install GB-
Ware? where “device number” is the Compact Flash card or hard drive you
will be writing to, and “runtime version” is the GNAT Box runtime version
you have selected.
Tab to
OK
, then press
SPACE BAR
or
ENTER
when you are sure you have
selected the correct drive and are ready to install the runtime.