Global Technology Associates SOFTWARE FIREWALL GBWA200501-01 - Manual (Page 57)

4 – Troubleshooting 53
Note
If your NIC is not listed, it’s possible that you are upgrading from an
older version in which that NIC was supported. Please contact
support with any questions. If you are placing the configuration on
new hardware with different NICs, you will need to select your
cards.
10) Save the configuration to the firewall by clicking on the
SAVE ALL
button on the tool bar or by selecting File then Save All. This will save
the entire configuration and any changes you have made to the
GB-Ware firewall.
Note
If your firewall’s logical network differs from the previous network
that you used to access the firewall, you may not be able to access
the firewall until you alter your computer’s network settings to join
the firewall’s new logical network.