Global Technology Associates SOFTWARE FIREWALL GBWA200501-01 - Manual (Page 53)

4 – Troubleshooting 49
(Refer to the motherboard’s user guide if you cannot locate the IDE
controller ports.)
Locating the Primary IDE Controller Port
Mounting the Compact Flash Card
Mount the adapter board securely inside the firewall’s case; find a place
where the components fit easily and securely, and where the IDE cable can
easily reach from the adapter board to the primary IDE controller port. DO
NOT mount the adapter board onto or near other electronic components
inside the case.
Warning
The Compact Flash card is NOT hot-swappable. Never insert or
remove the Compact Flash card while the power is on. Doing so
can damage the Compact Flash card, and electrical discharge could
cause injury. Never open your GB-Ware firewall’s chassis while it
is plugged in or powered on!
Mounting the Compact Flash IDE Adapter Inside the Intended Firewall