GCC Printers 21 Series - Manual (Page 17)

14
6. Squeeze the right side paper guide as
shown. Lift the guide slightly and slide it
towards the paper stack until it touches
the paper. Do not set the guide too
tightly against the paper stack, as this
could cause paper feed jams.
7. Squeeze the paper length guide at the
rear of the tray as shown. Lift the guide
slightly and slide it towards the paper
stack until the guide matches up with
the indentation in the bottom of the
paper tray which corresponds with the
paper size being used.
8. Grasp the paper tray with both hands
at the left and right, as shown.