GCC Printers 21 Series - Manual (Page 53)

50
Windows 2000 Software Installation -
Using the Add Printer Wizard
1. Go to the Start menu of Windows
2000, then up to Settings and select
Printers. In the Printers window,
double-click the Add Printer icon to
start the Add Printer Wizard.
Click “Next” at the Add Printer Wizard
welcome screen.
2. The next window of the Add Printer
Wizard will ask if the printer is
connected to the local computer or to a
Network Printer Server.
Select “Local Printer” unless the printer
that you are selecting is attached to
another PC or accessed via an NT or
2000 server. De-select the box marked
“Automatically detect and install my
Plug and Play printer.” Click Next.
Note: If setting up the printer as a
stand-alone Ethernet network device,
select “Local Printer” at this point and
install the driver as if the printer were
connected to the parallel (LPT1:) port
of the PC. After the installation, refer to
the Windows 2000 section of Chapter
7 of the Elite 21 User’s Manual on the
printer CD-ROM (Networking the Elite
21 Series Printer) for instructions on
configuring the printer as a network
device.