Fargo DTC300 - Manual (Page 29)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 3-1
Section 3: Setup and Installation
Procedures
The following guide will walk you through the installation of the DTC400/DTC300/DTC300M
Card Printer Driver.
• Time Requirement (software): This software installation process will require
approximately 2 to 5 minutes (depending on the speed of your PC).
• Time Requirement (Printer): The time required to set up a standard
DTC400/DTC300/DTC300M Printer would be approximately 5 to 10 minutes.
The System Requirements are as follows:
IBM-PC or compatible, Windows® 98SE, Me/2000/XP, Pentium® class 233MHz computer
with 64MB of RAM or higher, 200MB free hard disk space or higher, USB 1.1
Table of Contents
Section 3: Setup and Installation Procedures ___________________________________ 3-1
Table of Contents ______________________________________________________ 3-1
Printer Setup and Installation_____________________________________________ 3-3
Choosing A Good Location ____________________________________________ 3-3
About Moisture Condensation __________________________________________ 3-3
Unpacking and Inspection _____________________________________________ 3-4
Reviewing the Printer (front view) ______________________________________ 3-5
Reviewing the Printer (front view; Cartridge being installed)__________________ 3-5
Reviewing the LCD (top-front part of Printer) _____________________________ 3-6
Connecting the Printer power___________________________________________ 3-7
Installing the Print Ribbon Cartridge _____________________________________ 3-8
Installing the Print Ribbon Cartridge (continued) _________________________ 3-9
Installing the Print Ribbon Cartridge (continued) ________________________ 3-10
Installing Blank Cards into the Card Hopper______________________________ 3-11
Installing Blank Cards into the Card Hopper (continued) __________________ 3-12
Installing Blank Cards into the Card Hopper (continued) __________________ 3-13
Lowering the Card Output Hopper _____________________________________ 3-14
Printer Driver Installation ______________________________________________ 3-15
Installing the Printer Driver ___________________________________________ 3-15
Installing the Printer Driver (continued) _______________________________ 3-16
Installing the Printer Driver (continued) _______________________________ 3-17
Installing the Printer Driver (continued) _______________________________ 3-18
Installing the Printer Driver (continued) _______________________________ 3-19
Installing the Printer Driver (continued) _______________________________ 3-20
Installing the Printer Driver (continued) _______________________________ 3-21
Installing the Printer Driver (continued) _______________________________ 3-22
Installing the Printer Driver (continued) _______________________________ 3-23
Installing the Printer Driver (continued) _______________________________ 3-24
Installing the Printer Driver (continued) _______________________________ 3-25
Installing the Printer Driver (continued) _______________________________ 3-26