Stovax E-Studio PR0776 - Manual (Page 22)

22
27
AR1410
A3
A3
9.5 The coals/pebbles should evenly cover the whole bed with
the gaps between them kept equal. This will maximise the
performance of the product.
9.6 ENSURE ThAT ThE COAlS/PEBBlES ARE POSITIONED
AS ABOvE. ONlY USE ThE CORRECT AMOUNT OF
COAlS/PEBBlES AS SPECIFIED IN ThE DIAGRAMS.
FITTING ThE GlASS wINDOw - E-BOX
9.7 • Ensure that the fibre glass window seal on the box is
intact, then lower the glass window into the lower retaining
bracket.
• Hold the window and position the upper retaining
bracket
• Secure using the 4 screws.
• Tighten the bottom and top screws to retain the window,
Diagram 28.
28
AR1465 AR1423
• Refer to the separate Frame Instructions to replace the
frame on the fire
NEvER OPERATE ThE APPlIANCE whEN ThE GlASS
PANEl IS REMOvED OR BROKEN.
24
AR1407
9.4 There are 10 loose pebbles in the set supplied. Each pebble
is individually marked. The quantity of each type is shown
below.
A1 x 3 A4 x 1
A2 x 1 A5 x 1
A3 x 3 A6 x1
• Place the four pebbles as shown resting between the
front ceramic and the flame baffle, Diagram 25
25
AR1408
A4 A5 A3 A6
• Place the next four pebbles as identified resting between
the flame baffle and the first row of pebbles as shown in
Diagram 26
26
AR1409
A1
A2
A1
• Place the remaining two A3 pebbles as shown in Diagram
27.
INSTAllATION INSTRUCTIONS
INSTAllATION