GoVideo DV1030 - Manual (Page 11)

19
BASIC
O
PERA
TION
18
DVD Playback
Press [POWER] to power on.
Press [DVD] to select DVD mode.
Press [EJECT] to open the disc tray.
Place your disc firmly on the disc tray, with the label facing upward.
Insert the disc and press [EJECT] to close the tray.
The disc tray is closed and after checking the disc’s condition, many discs will
start playback automatically.
1 1
2 2
3 3
To start playback, press [PLAY/PAUSE].
• In the case of DVD,
DVD menus and titles are often displayed on screen.
• In the case of S-VCD and VCD2.0:
The disc menus are displayed on screen and are converted into PBC
(Playback Back Control) mode.
• In the case of CD, VCD1.1 and MP3:
The disc plays in order of its track numbers.
4 4
To stop playback, press [ ].
To pause, press [PLAY/PAUSE] during playback.
Press [PLAY/PAUSE] again to resume playback.
5 5
Press [EJECT] to remove the disc. 6 6
Various Playback Methods
■ For fast (or reverse) playback, press [√ √√ √ ] or [œ œœ œ ] in Playback mode.
* Unavailable during MP3 playback and with certain DVDs.
■ For slow (or reverse) playback, press [√ √√ √ ] or [œ œœ œ ] in Pause mode.
* Not available during VCD playback. The mark will appear.
■ For still picture, press [PAUSE] in Playback mode.
PREV NEXT
VCR Playback
Press [POWER] to power on.
Press [VCR] to select VCR mode.
Insert the desired tape.
To start playback, press [PLAY/PAUSE].
When the picture is flickering or poor, adjust it with the [TRACKING +/–]
buttons.
1 1
2 2
3 3
To stop playback, press [ ].
For pause, press [PLAY/PAUSE] in playback mode.
Press [PLAY/PAUSE] again to resume playback.
4 4
Press [EJECT] to remove the tape. 5 5
Various Playback Methods
■ For fast forward (or reverse) playback, press [√ √√ √ ] or [œ œœ œ ] in Playback mode.
■ For Still picture, press [PLAY/PAUSE] in Playback mode.
■ For slow-motion playback, press [√ √√ √ ] in Pause mode.
* NOTE: The VCR does not have Slow Reverse Playback.
■ For Frame Advance, press [NEXT ] in Pause mode. Each time you press this
button, the picture advances one frame.
PREV NEXT
If the VCR detects
contaminated
head(s), it shows an
on-screen message to
bring this to your
attention.
* If you see this
message, clean the
video heads with a
commercial head-
cleaner.
To Adjust Display
This product includes automatic Tracking so you can enjoy a clear picture without
additional operation. However:
- If the screen is poor in Playback mode,
- If noises occur in the upper or lower part of the screen in slow playback mode,
- If paused picture vibrates up and down.
Then try using the [TRACKING +/–] buttons to adjust the display manually.
If you press no
button in 5 minutes
after you are opened
the tray, the player
closes the tray
automatically to
prevent from damage.