Recording – GoVideo DV1030 User Manual
Page 13
22
To Watch Another TV Channel or DVD during recording
1
1
If you want to watch another TV channel during recording, press [TV/VCR].
Select the desired channel on your TV.
2
2
If you want to playback a DVD during recording, insert a DVD disc.
Place the desired DVD disc on DVD tray, press [DVD] to change OUTPUT to DVD
mode and press [PLAY].
Recording
Press [POWER] to power on.
•
Press [VCR] to select VCR mode.
•
Power on TV and select Ch 3, or press [INPUT] on your TV to select
External Input mode.
Insert a recordable tape.
Insert a tape with recording tab.
With [CHANNEL], [0-9] and [INPUT] buttons, select the desired
channel or external input to record.
1
1
2
2
3
3
To Record With VCR
Select the desired speed (SP or SLP) with the [SP/SLP] button.
4
4
Press [REC] button.
The unit starts recording.
5
5
If you want to pause recording, press [PAUSE].
After pressing [PAUSE], if the unit is left in Pause mode for five minutes, the
recording is stopped automatically.
6
6
To exit recording, press [STOP].
7
7
PREV
NEXT
23
VCR
OPERA
TION
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
To Record From DVD To Videotape during DVD playback
One Touch Recording (OTR)
■
To record the current TV program at the touch of a button, follow the procedures below.
Recording
1
1
First, follow steps 1 to 4 under “To Record With VCR”.
2
2
Press [REC] as repeatedly to set the desired recording time as follows:
Once ......... continuous recording until you press [STOP]
Twice ........ record for 30 mins from current time
3 (times)..... record for 1 hour
9 .............. record for 4 hours
10 ............ Return to normal (continuous) recording
3
3
To stop Recording, press [STOP] for more than 5 seconds.
1
1
Press [DVD] to select DVD mode.
Insert the desired DVD disc.
You cannot record copy-protected DVD discs.
Insert a recordable tape.
2
2
Play the DVD disc and press [REC].
DVD plays and VCR starts recording.
3
3
To exit copy, press [ ].
Recording stops automatically when DVD playback is finished or recorded tape
reaches the end.
Video recorded in PROGRESSIVE SCAN mode will playback abnormally. First
change PROGRESSIVE to INTERLACED mode in the SCAN MODE screen, then
record from DVD to videotape. (refer to pages 42, 44)