GoVideo DV1030 - Manual (Page 12)

21
VCR
OPERA
TION
20
To Delete Channels Manually
■ To delete memorized channels:
■ To change between Antenna and Cable TV:
1 1
Press [SETUP] and select “CHANNEL SET”.
Select “Add/Remove Channels”.
2 2
Select the desired channel and delete it.
ADD/REMOVE CHANNELS
Channel 02
is now REMOVED.
To Memorize Channels Manually
■ To add or remove channels manually:
Press [SETUP] and select “CHANNEL
SET”.
Select “Add/Remove Channels”.
1 1
Select the desired channel and memorize it.
Use the [0-9] buttons to select the desired
channel.
When [>] is pressed, “REMOVED” under the
channel number changes to “ADDED”.
2 2
Check the memorized channel.
To check the memorized channel, press [CH+/–] on the remote control.
3 3
ADD/REMOVE CHANNELS
Channel 02
is now ADDED.
Memorizing TV Channels
Memorizing TV Channels
Press [SETUP].
Press [ ] to move to CHANNEL SET, and
then press [ENTER].
Select “AUTO CHANNEL SEARCH”.
Press [ENTER] to select AUTO CHANNEL
SEARCH.
Select “Detect Automatically”.
Press [ENTER] to detect the channel
automatically.
The DVD+VCR searches for all available
channels. When this process is complete, the
lowest channel found is displayed.
Check memorized channels.
To check the memorized channels, press [CH+/–] on the remote control.
1 1
2 2
3 3
To Automatically Memorize Channels
SETUP
CLOCK SET
TIMER RECORDINGS
CHANNEL SET
FUNCTIONS
LANGUAGE SELECT
AUTO CHANNEL SEARCH
What type of signal are you
using?
Cable TV
Antenna
Detect Automatically
AUTO CHANNEL SEARCH
Now scanning channel 11
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Channel Change: CH3
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Channel Change: CH3
Selecting cable or antenna viewing
To set the signal type:
Press [ENTER] to toggle the setting between CABLE and
ANTENNA in the CHANNEL SET screen.
When the desired signal type is displayed, press [SETUP]
twice to exit. CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Channel Change: CH3
To Set Cable Box
To Set Output Channel
Press [SETUP] and select “CHANNEL SET”.
Select “Channel Change”.
Press [ENTER] to set the RF Output channel to CH3 or
CH4.
Press [SETUP] and select “CHANNEL
SET”.
Select “Cable Box Setup”.
1 1
Select “Cable Box Channel”.
Enter the channel number which matches to the
output of the Cable Box.
2 2 CABLE BOX SETUP
On what channel do you
want to receive from
the cable box?
- -
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Channel Change: CH3
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Channel Change: CH3
Use the [0-9] buttons to select the desired channel to delete.
When [<] is pressed, “ADDED” under the channel number changes to “REMOVED”.
3 3
To check the deleted channel, press [CH+/–] on the remote control.