GoVideo DV1030 - Manual (Page 17)

31
VCR
OPERA
TION
Hi-Fi Stereo Playback
Playing a tape in Hi-Fi high-quality
• “Hi-Fi” appears at the top of the screen.
• Pressing [AUDIO] changes the audio track as follows:
If there is noise in the recording, please “Linear” to reduce it.
Forced Mono
Recording Stereo or Secondary Audio Programs (SAP)
• In some cases reception is poor when receiving stereo or SAP (Secondary Audio Program) audio signals. Press
[AUDIO] to improve this poor audio quality by changing to mono sound.
• Press [AUDIO] again or change the channel to resume normal stereo or SAP sound.
Hi-Fi LINEAR MIX
STEREO MONO SAP
• Programs are broadcast in mono, stereo, or SAP.
• Press [AUDIO] to select STEREO, MONO, SAP in the following order:
• While recording a stereo signal, it is recorded in Hi-Fi.
• The following guidelines will help you decide on the best method for recording programs. Choose:
- Stereo reception for normal recording and to record broadcast stereo television.
- Mono reception if the stereo signal is weak and sound is too “noisy.”
- SAP reception to record a second audio program. An example of an SAP is a program that is broadcast in English,
but has a Spanish SAP.
• You can only record stereo and SAPs if the program is broadcast in stereo or with an SAP. Consult a television guide
for specific broadcast information.
30
Changing the on-screen menu language
Press [SETUP] button and select
“LANGUAGE SELECT”.
1 1
Set the language to English, Spanish or
French and [ENTER].
2 2
■ You can set the language for VCR Setup menus to English, Spanish, or French.
LANGUAGE SELECT
Select a language.
English
Spanish
French
Move: Select:
End: SETUP
ENTER
SETUP
CLOCK SET
TIMER RECORDINGS
CHANNEL SET
FUNCTIONS
LANGUAGE SELECT
Move: Select:
End: SETUP
ENTER
Display (O.S.D)
1 1
Press [DISPLAY] to display the tape counter, clock and status mode on the TV
screen.
2 2
Press [DISPLAY] again to view just the tape counter.
Press [SETUP] button and select “CLOCK SET”.
Move into “Auto DST” with [ ] .
1 1
Press [ENTER] to switch between ON
and OFF.
- Select ON if you want the VCR’s clock to
automatically adjust for daylight-saving
time.
- Select OFF if you do not want the VCR’s
clock to adjust for daylight-saving time.
2 2
Spring Forward ; Fall Back
In the Spring, daylight-saving time begins on the first Sunday in April. Because the clock
automatically changes from 2:00 AM to 3:00 AM (forward one hour), remember to include the
extra hour for any timer recordings falling within this time frame.
In the Autumn, daylight-saving time ends on the last Sunday in October.
The VCR clock automatically changes from 2:00 AM to 1:00 AM (back one hour). Therefore, it can
also affect your recording length.
Daylight-Saving Time
CLOCK SET
Time and Date Set
Auto DST : ON
Move: Select:
End: SETUP
ENTER
Using Advanced Features