Gyration GyroRemote and Mobile RF Keyboard - Manual (Page 3)

1
GyroRemote
To Set Up and Synchronize the GyroRemote and the
Receiver:
1. Power on your computer and connect the Receiver USB cable into
an available USB port on your computer.
2. Follow standard USB device installation screens.
3. Insert 4 AAA batteries into GyroRemote handset.
4. Press and hold the LEARN button on the Receiver for 2 seconds. The
STATUS light will blink slowly, indicating that the receiver is in
“Learn Mode.”
5. Press the TEACH button on the GyroRemote handset. The status
light on the Receiver will blink rapidly for 4 seconds, then will blink
slowly. Push the TEACH button on any additional devices (i.e. key-
board or 2
nd GyroRemote) at this time.