GE 25826GC - Manual (Page 16)

16
4. Press the prog/select button.
5. Use the touch-tone pad to enter the handset name.
More than one letter is stored in each of the number keys. For example, to
enter the name Bill Smith, press the 2 key twice for the letter B. Briefly
pause and the cursor moves to the next field. Press the 4 key 3 times for
the letter I. Briefly pause and the cursor moves to the next field. Press the
5 key 3 times for the letter L. Briefly pause and the cursor moves to the
next field. Press the 5 key 3 times for the second letter L, press 1 key to
add a space. Press the 7 key 4 times for the letter S. Briefly pause and the
cursor moves to the next field. Press the 6 key once for the letter M. Briefly
pause and the cursor moves to the next field. Press the 4 key 3 times for
the letter I. Briefly pause and the cursor moves to the next field. Press the
8 key for the letter T. Briefly pause and the cursor moves to the next field.
Press the 4 key twice for the letter H.
NOTE: If a name is already stored in the handset, you may remove it by
pressing the delete/redial button.
NOTE:
If you make a mistake press the delete/redial key to backspace and
erase the wrong character.
6. Press the prog/select button to save the name The confirmation screen
shows for two seconds, then returns to the main menu. You will hear a
confirmation tone.
A
REA
C
ODE
If you entered a 3-digit area code in the area code menu, your local area
code does not display on the Caller ID (CID) list. Instead, you only see the
local seven digit number. Calls received from outside your local area code
display as the full ten-digit number.
HANDSET NAME
ENTER NAME
BILL SMITH
HANDSET NAME