GE 25826GC - Manual (Page 35)

35
2. Enter the handset number you want to intercom/conference. The
receiving handset is paged.
SENDING PARTY RECEIVING PARTY
3. The receiving handset must press the int/conf or talk/callback or spk
button to answer the intercom, then both intercom users may speak
privately. The external caller cannot hear the intercom conversation.
SENDING PARTY RECEIVING PARTY
4. Press the int/conf button on the sending handset to initiate a
conference between handset 1 and handset 2 with an external caller.
NOTE: Press the exit button on the handset to cancel the intercom call, and
the sending party may continue to talk to the external party. Or the calling
party may press the talk/callback button to transfer the call to the receiving
party who may speak to the external caller independently.
NOTE: A handset can enter conference directly by pressing talk/callback
while the other handset is on an external call.
S
TORING A
R
EDIAL
N
UMBER
1. Make sure your phone is OFF (not in TALK mode).
2. Press the delete/redial button on the handset.
3. Press CID/VOL ( or ) button to scroll to the desired redial number.
4. Press the memory button, and the display shows ENTER NAME.
HANDSET 2
INTERCOM
HOLD 01:40 VOL1
HANDSET 1
INTERCOM
HANDSET 2
PAGING
HOLD 01:39 VOL1
HANDSET 1
PAGING FROM