GE 25826GC - Manual (Page 24)

24
NOTE: Registration should only take about 1 minute. If there is no response
after 1 minute, press the *exit button and re-start the registration process.
6. Use the touch-tone pad to enter the name.
More than one letter is stored in each of the number keys. For
example, to enter the name Bill Smith, press the 2 key twice for the
letter B. Briefly pause and the cursor moves to the next field. Press the
4 key 3 times for the letter I. Briefly pause and the cursor moves to the
next field. Press the 5 key 3 times for the letter L. Briefly pause and the
cursor moves to the next field. Press the 5 key 3 times for the second
letter L, press 1 key to add a space. Press the 7 key 4 times for the letter
S. Briefly pause and the cursor moves to the next field. Press the 6 key
once for the letter M. Briefly pause and the cursor moves to the next
field. Press the 4 key 3 times for the letter I. Briefly pause and the
cursor moves to the next field. Press the 8 key for the letter T. Briefly
pause and the cursor moves to the next field. Press the 4 key twice for
the letter H.
NOTE: If you make a mistake press the delete/redial button to backspace and
erase the wrong character(s).
7. Press the prog/select button to save, and exit the standby mode, the
name shows in the display.
H
ANDSET
D
EREGISTRATION
Deregistration cancels a handset’s registration. During the de-registration
process, it’s important to keep the handset near the base.
WARNING: It is not recommended that a handset be de-registered unless
absolutely necessary because once a handset is deregistered, that handset’s
telephone features cannot be used until the handset is re-registered.
1. Make sure your phone is OFF (not in TALK mode).
ENTER NAME
HANDSET NAME