GE 25826GC - Manual (Page 29)

29
C
ALL
T
IMER
After you press talk/callback or spk button on the handset, the built-in call
timer shows in the display and counts the length of time of the call in
minutes and seconds.
A
UTO
S
TANDBY
Placing the handset in the base cradle while the handset is off hook
(during a call) automatically hangs up the handset.
C
ALL
W
AITING
If you subscribe to the combined Call Waiting Caller ID service from your local
telephone company, you will receive Caller ID information (if available) on Call
Waiting calls. During a phone call you will hear a beep, which indicates
another call is waiting on the line, and Caller ID information shows in the
handset display. To connect to the waiting call, press the flash button on the
handset, and your original call is put on hold. You may switch back and forth
between the two calls by pressing the flash button.
F
LASH
Use the flash/answerer button on the handset to activate custom calling
services, such as call waiting, which are available through your local
phone company.
TIP: Don’t press the talk/callback or spk button on the handset to activate a
custom calling service, such as call waiting, or you’ll hang up the phone.
R
EDIAL
You may redial the last 4 numbers, each up to 32 digits long. If the
number is longer than 32 digits, it won’t be stored in the redial list. To
quickly redial the last number you dialed:
1. Press the talk/callback or spk button on the handset.
2. Press the redial button to redial the last number called.
-OR-
1. Press the redial button.