GE 25826GC - Manual (Page 21)

21
T
O
R
EVIEW
/C
HANGE
/D
ELETE
:
1. Repeat steps 1 - 5 in previous section.
2. If there is a VIP which has already been assigned to this location, it will
toggle to display that VIP name and number in 2 second intervals.
3. You can change, delete or return to previous menu:
a) Press prog/select button to re-assign the VIP record by following
the same procedure described in points 6 to 10 of the previous
section, or
b)Press delete/redial button to delete the VIP record DELETE VIP # ?
will show on the display. Press delete/redial button again to
confirm the deletion, or
c) Press exit to return to previous menu.
S
ETTING THE
S
ECURITY
C
ODE
This unit provides you with the ability to access the answering system
from a tone dialing telephone in another location. The security code is
required for remote access, and it prevents unauthorized access to your
answering system. The default code is
#123, and you may change the last 3
digits of the security code with any handset registered to the unit. The
security code has to start with
#.
1. Make sure your phone is OFF (not in TALK mode).
2. Press prog/select button to enter into MAIN MENU.
3. Press the CID/VOL (
or ) button to scroll to SECURITY CODE.
VIP MELODY
VIP 3
MELODY 7
VIP MELODY
JOHN SMITH
317‐123‐4567