GE JCB968 - Manual (Page 27)

27
+
+
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
www.GEAppliances.ca
Tone Volume
This feature allows you to adjust the tone volumes
to a more acceptable volume. There are three
possible volume levels.
Touch the BROIL HI/LO and BAKE
pads at the same time for 3 seconds,
until the display shows SF.
Touch the OVEN LIGHT ON/OFF pad.
The display will show 2 BEEP. This is
the middle volume level.
Touch the OVEN LIGHT ON/OFF pad
again. The display will show 3 BEEP.
This is the loudest volume level.
Touch the OVEN LIGHT ON/OFF pad
again. The display will show 1 BEEP.
This is the quietest volume level.
For each time the level is changed,
a tone will sound to provide an
indication of the volume level.
Choose the desired sound level
(1 BEEP, 2 BEEP, 3 BEEP).
Touch the START pad to activate
the level shown.
12-Hour, 24-Hour or Clock Blackout
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour
military time clock or black out the clock
display, follow the steps below.
Touch the BROIL HI/LO and BAKE
pads at the same time for 3 seconds
until the display shows SF.
Touch the CLOCK pad once. The
display will show 12 hr. If this is
the choice you want, touch the
START pad.
Touch the CLOCK pad again to
change to the 24 hour military time
clock. The display will show 24 hr.
If this is the choice you want, touch
the START pad.
Touch the CLOCK pad again to black
out the clock display. The display will
show OFF. If this is the choice you
want, touch the START pad.
NOTE: If the clock is in the black-out mode you
will not be able to use the Delay Start function.
Auto Recipe ™ Conversion (on some models)
When using convection bake, the Auto Recipe ™
Conversion feature will automatically convert
entered regular baking temperatures to convection
baking temperatures.
This feature is activated so that the display will
show the actual converted (reduced) temperature.
For example, if you enter a regular recipe
temperature of 350°F and press the START pad,
the display will show CON and the converted
temperature of 325°F.
To deactivate the feature:
Press the BAKE and BROIL HI/LO pads
at the same time for 3 seconds, until
the display shows SF.
Press the CONVECTION BAKE
MULTI/1 RACK pad. The display
will show CON ON. Press the
CONVECTION BAKE MULTI/1 RACK pad
again. The display will show CON OFF.
Press the START pad.
To reactivate the feature, repeat steps
1–3 above but press the START pad when
CON ON is in the display.