GoVideo GV8050 - Manual (Page 45)

FRONT PANEL DISPLAY 45
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
TIMER If you have programmed the VCR to record a TV show at a certain time (Timer
Record), the Timer indicator will be ON, telling you that the VCR will begin recording
at the time you have set. The Timer indicator will also be ON if the VCR is currently
recording a TV show that you programmed in Timer Record. The Timer indicator will
BLINK if there is an error in your Timer Record program. If the Timer indicator is
blinking, press
DISPLAY
. The On-Screen Display will tell you what the error is.
REC The REC indicator will be ON if you are currently recording something onto a VHS
tape.
IDX The IDX indicator will be ON when you are searching for a particular index mark on a
VHS tape, or when you are scanning through the index marks on a VHS tape. The IDX
indicator will BLINK while an index mark is being placed on a VHS tape. See the VHS
Index Search System section in the Reference Guide for indexing procedures.
DUB The DUB indicator will be ON when you are dubbing audio onto a VHS tape. The DUB
indicator will BLINK when the VCR is ready to begin an audio dub. See the Adding
New Audio section in the User’s Guide for audio dubbing procedures.
Hi-Fi The Hi-Fi indicator will be ON when a tape with Hi-Fi audio is playing, if HIFI AUDIO
in the VHS MENU is turned ON..
8mm and VHS Sections
SP, LP, (SLP-VHS only)
This indicator shows the tape speed for each deck. If you are playing a tape, the tape
speed is the speed at which the tape was recorded. If you are recording onto a VHS
tape, you can set the tape speed using the RECORD SPEED option in the VHS MENU.
The Tape Indicator will be ON if there is a tape in that deck.
Center Section
8mm VHS TUNER L1 L2
One of these indicators along the top of the Front Panel Display will be ON. This TV
VIEW indicator will show the source of what you are currently watching on the TV.
For example, if 8mm is ON, you are watching the 8mm deck. If Tuner is ON, you are
watching a television or cable channel.