GoVideo GV8050 - Manual (Page 53)

REMOTE CONTROL 53
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
Automatic Editing Controls
You must have an 8mm tape inserted to use the Automatic
Editing keys.
SCENE
Press to enter the 8-scene Automatic Assembly
Editing screen. Press again to enter the Scene List.
While in the Scene List, press to cycle through the
list.
BEGIN
While in the Scene List, press to indicate the
beginning of a scene.
END
While in the Scene List, press to indicate the end of
a scene.
Clock/Counter Keys
See the Tape Counter and Memory Stop section of this
manual for more detailed information on the Tape Counter.
MEMORY
Press to toggle the Tape Counter Memory Stop for
the active deck on and off. M will appear on the On
Screen display Deck Status line for that deck.
CLK/CTR
Press to switch the Front Panel Display and
On Screen Display between the Clock, the Tape
Counter, and the Time Remaining, for the active
deck.
VHS Slow Motion Keys
Press either key during playback to enter slow motion
playback (VHS deck only). Press
PLAY
to restore normal
playback.
- SLOW
Press to slow down slow motion playback. Each
press will slow the playback down a little more.
SLOW +
Press to speed up slow motion playback. Each
press will speed the playback up a little more.