Americhrome copy menu, Display menu – GoVideo GV8050 User Manual

Page 64

Advertising
background image

64

GO VIDEO REFERENCE GUIDE

AmeriChrome

Copy Menu

2: AUDIO INSERT

AMERICHROME COPY MENU

1: SET DISPLAY OPTIONS

-

OFF

MENU KEY FOR NEXT MENU

SELECT KEY TO CHOOSE
ARROW KEYS TO CHANGE

2: SET TITLE MESSAGE
3: TITLER

DISPLAY MENU

1: TIME STAMP

MENU KEY FOR PREV MENU

SELECT KEY TO CHOOSE
ARROW KEYS TO CHANGE

4: DISPLAY MODE

OFF

-

OFF

-

OFF

-

Tip:

To cycle through all the choices

for an item, you may need to

press

SELECT

more than once.

While in the Display menu, you

can press

MENU

to advance to

the TIMER RECORD menu, or

QUIT

to exit the menu system.

The Dual-Deck VCR will

remember your new settings.

TM

Use the AMERICHROME COPY MENU to set Audio Insert,
the Date/Time Stamp, and Custom Titling.

1. Press

1

or

SELECT

at SET DISPLAY OPTIONS to access

the DISPLAY MENU, where you set the Date/Time
stamp, the Titler, and the On-Screen Display format.

2. Press

2

or use the arrow keys to move to AUDIO

INSERT. Press

SELECT

to set AUDIO INSERT to OFF or

ON. Normally, you will set AUDIO INSERT to OFF.
Change AUDIO INSERT to L1 or L2 if you want to
record entirely new audio onto a VHS tape, while you are
copying an 8mm tape onto the VHS tape. Set AUDIO
INSERT to L1 if you use the LINE 1 AUDIO IN front
panel connections, and to L2 if you use the LINE 2
AUDIO IN rear panel connections.

DISPLAY MENU

1. Press

1

or

SELECT

to set TIME STAMP to OFF, TIMER, or

ALL. Select OFF if you don’t want the current date and
time recorded onto the beginning of your recordings.
Select TIMER if you want the date, time and channel
source recorded onto the beginning of Timer recordings
only, and ALL if you want the date and time recorded on
to the beginning of all recordings except Copy Tape
recordings.

2. Press

2

or use the arrow keys to move to SET TITLE

MESSAGE. Press

SELECT

to enter the TITLER SETUP

SCREEN (see next page).

3. Press

3

or use the arrow keys to move to TITLER.

Press

SELECT

to set TITLER to ON if you want to record

the title that you set in the TITLER SETUP SCREEN
onto your VHS tape. (Most of the time, you will have
TITLER set to OFF.)

4. Press

4

or use the arrow keys to move to DISPLAY

MODE. Press

SELECT

to set DISPLAY MODE to FULL if

you want a fully functioning automatic On Screen
Display. Set to TAPE if you want the automatic display
to show information for the two tape decks but not
information on the Tuner. Set to TUNER if you want
the display to show information on the Tuner, but not
on the two decks. Set to OFF if you want no automatic
On Screen Display (you will still be able to summon
an On Screen Display manually by pressing

DISPLAY

).

Advertising