GoVideo GV8050 - Manual (Page 61)

ON SCREEN MENU SYSTEM 61
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
3. Press
3
or use the arrow keys to move to SET CHAN-
NEL MEMORY. Press
SELECT
to manually enter or delete
channels in CHANNEL MEMORY. You can ADD or
DELETE any channel by using the number keys to tune
in to that channel, then use the arrow keys to move to
ADD or DELETE, and press
SELECT
. You can also ADD
ALL or DELETE ALL channels by moving to that item
and pressing
SELECT
.
4. Press 4 or use the arrow keys to move to TUNER
AUDIO. Press
SELECT
until you reach your desired tuner
audio choice: STEREO, MONO, SAP, TV+SAP, SIMUL1,
or SIMUL2. STEREO produces stereo sound if the
program is in stereo, otherwise it produces monaural
sound. MONO produces monaural sound. SAP produces
Second Audio Program. TV+SAP produces normal sound
from one speaker and SAP sound from the other.
SIMUL1 receives audio input from the LINE 1 AUDIO
IN connections on the front panel of your 8mm/VHS
Tip:
To cycle through all the
choices for an item, you may
need to press SELECT more
than once.
While in the TUNER/
CHANNEL MENU, you can
press MENU to return to the
SETUP MENU, or QUIT to
exit the menu system. The
Dual-Deck VCR will
remember your new
settings.
ADD
DELETE
ADD ALL
DELETE ALL
▲
CH 03
MENU KEY FOR PREV MENU
SELECT KEY TO CHOOSE
ARROW KEYS TO CHANGE
Dual-Deck VCR. SIMUL2 receives audio input
from the LINE 2 AUDIO IN connections on the
rear panel of your VCR. See the Audio Connections
section of this manual for more information on
Simulcast Stereo.
Secondary Audio Programming (SAP)
Some TV and cable channels broadcast a Secondary
Audio Program, usually a second language, along with
the regular audio. All Second Audio Program broad-
casts are monaural. When you tune your 8mm/VHS
Dual-Deck VCR to a channel with a Second Audio
Program, SAP will appear on the Front Panel Display
(whether or not you have SAP selected). When you
have selected SAP or TV+SAP for your TUNER
AUDIO, SAPSET will appear on the Front Panel
Display. If you have selected SAP or TV+SAP and the
broadcast does not contain a Second Audio Program,
normal Stereo audio will be heard.