Cable converter box hookup – GoVideo GV8050 User Manual

Page 85

Advertising
background image

HOOKING UP YOUR DUAL-DECK VCR

85

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

Cable Converter Box Hookup

Use this hookup if you have a converter box with your cable
system. You will be able to record any cable channel which
you subscribe to, and watch that channel. With this hookup,
you must always keep your 8mm/VHS Dual-Deck VCR
tuned to the same channel (2, 3, or 4; see p.54 in this Guide).
You will change channels on the cable converter box. You
will also select the channel for a timer recording on the
cable converter box.

1. Place your 8mm/VHS Dual-Deck VCR next to your TV

and plug the VCR power cord into a wall outlet. Discon-
nect all antenna and cable connections.

2. A cable is supplied with your 8mm/VHS Dual-Deck VCR.

Connect the round end of this cable to the OUT TO TV
connection on the back of your 8mm/VHS Dual-Deck
VCR. Connect the other end of the cable to the VHF IN
or CABLE IN connection on the back of your TV.

3. Turn on the power for your VCR and your TV.

4. Turn your TV to channel 3.

5. Press the

MENU

key on your VCR remote control.

You should see a blue screen and a menu. Press

QUIT

to exit the menu.

6. Attach the cable that comes out of your wall with the

input connection on the back of your cable converter box.

7. Attach one end of the cable supplied with your cable

converter box to the output connection on the back of
your cable converter box. Attach the other end to the IN
FROM ANTENNA connection on the back of your VCR.

Tip:

If you don’t see a blue screen

and a menu, look on the front

panel display for the word ‘VCR’

in red. It should be under ‘CH’. If

it’s not there, press the TV/VCR

key on your remote control to

enter VCR mode.

Advertising