GoVideo GV8050 - Manual (Page 87)

HOOKING UP YOUR DUAL-DECK VCR 87
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
1. Place your 8mm/VHS Dual-Deck VCR next to your TV
and plug the VCR power cord into a wall outlet.
Disconnect all antenna and cable connections.
2. Using the cable supplied with your cable converter box,
connect the round end of this cable to the OUT TO TV
connection on the back of your 8mm/VHS Dual-Deck
VCR. Connect the other end of the cable to the input
connection on the back of your cable converter box.
3. A cable is supplied with your 8mm/VHS Dual-Deck
VCR. Attach the round end of this cable to the output
connection on the back of your cable box. Attach the
other end to the CABLE IN connection on the back of
your TV.
4. Turn your TV to channel 2, 3, or 4, whichever is used
by your cable system.
5. With all three devices turned on, tune your cable
converter box to channel 3 and push the MENU key.
➤ You should see a blue screen and a menu. Press
QUIT to exit the menu.
IN FROM ANTENNA:
OUT TO TV:
VIDEO
L R
AUDIO
IN (LINE 2)
OUT
3 4
CH
DUAL-DECK VCR BACK PANEL
VHF/UHF
TV BACK PANEL
Dual-Deck
VCR Cable
(supplied)
CONVERTER
CABLE
OUTLET
Coaxial Cable
MUL TIMEDIA
CONTROL
PORT