GoVideo GV8050 - Manual (Page 60)

60 GO VIDEO REFERENCE GUIDE
Setup
Menu
2: AUTO PROGRAM
TUNER/CHANNEL MENU
1: ANTENNA IN
MENU KEY FOR PREV MENU
SELECT KEY TO CHOOSE
ARROW KEYS TO CHANGE
4: TUNER AUDIO
-
-
STD CATV
3: SET CHANNEL MEMORY
STEREO
Note:
Don’t select AUTO PROGRAM
unless you are prepared to wait a
few minutes while the channel
selection process completes
itself. If you interrupt the process,
you’ll have to start over.
The SETUP MENU contains three submenus: TUNER/
CHANNEL SETUP, SET CLOCK, and SET AUTO
FEATURES. Use the SETUP MENU when you first connect
your Dual-Deck VCR, to choose your antenna source, program
the channel memory, and set the clock. You'll also use the
SETUP MENU to set Automatic Features. Use the numerical
keys to enter the number of the desired submenu, or use the
arrow keys to move to the desired submenu, and press
SELECT
to enter that submenu.
TUNER/CHANNEL MENU
Use the TUNER/CHANNEL MENU to set your antenna
source, channel memory, and tuner audio. The TUNER/
CHANNEL MENU has four items:
1. Press
1
or press
SELECT
to set ANTENNA IN to the source
of your antenna signal. Select TV if you do not subscribe
to a cable system. If you subscribe to cable and have no
cable converter box, you will most likely need to set
ANTENNA IN to STD CATV. However, some cable sys-
tems use HRC CATV or IRC CATV. Call your cable
company if you’re not sure which setting to use. If you
have a cable converter box, you don't need to set the
ANTENNA IN (the cable box bypasses this setting).
2. Press 2 or use the arrow keys to move to AUTO
PROGRAM. Press
SELECT
if you want the VCR to automati-
cally program the CHANNEL MEMORY. AUTO
PROGRAM goes through all the possible TV or cable
channels one by one. Any time it finds a channel with a
signal (a channel that you receive), it programs that
channel into CHANNEL MEMORY. Once you have run
AUTO PROGRAM, the channel selector (arrow keys) on
your 8mm/VHS Dual- Deck VCR will stop only at the
channels which you receive.
2: SET CLOCK
3: SET AUTO FEATURES
SETUP MENU
1: TUNER/CHANNEL SETUP
MENU KEY FOR NEXT MENU
SELECT KEY TO CHOOSE
ARROW KEYS TO CHANGE