GE DS-82 - Manual (Page 141)

Chapter 4: Web-Based Management
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual 137
LLDP Configuration
Use this page to change LLDP parameters.
Figure 94: LLDP Configuration
This page includes the following fields:
OBJECT DESCRIPTION
LLDP Status Enable/Disable LLDP.
LLDP hello time You can change LLDP hello time value. The time interval between the
transmission LLDP info packets. Value range is from 5 to 32768. Default
value is 30.
LLDP hold time You can change LLDP hold time value. (The hold time * the hello time) is
the TTL time in the LLDP info packets. Value range is from 2 to 10. Default
value is 4.
PerPort Configuration
This page allows the user to inspect and configure the current LLDP port settings. The
LLDP Configuration screen in Figure 95 appears.