GE DS-82 - Manual (Page 210)

Chapter 6: Command Line Interface
206 GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
poe priority
Description:
Set port priority for the power supply management.
The command is configurable while "poe limit-mode" is set to "Port Priority"
Command Level:
Global Configuration
Syntax:
poe priority { Critical | High | Low} [<port-list>]
Parameters:
{Critical | High | Low}
• Critical - Indicates that operating the powered device is high.
• High- Indicates that operating the powered device has medium priority.
• Low- Indicates that operating the powered device has low priority
<port-list> specifies the ports to be set. If not entered, all ports are set.
Example:
Switch(config)# poe priority low 1
Switch(config)# show poe status 1
Port Admin Oper Priority Power Limit[W]
Current
Consumption [W]
Current[mA]
Device
Class
Port1 Enable on Low 15.4 13.4 279 0