GE DS-82 - Manual (Page 146)

Chapter 5: Console Management
142 GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
Configure IP address
1. On "Switch(config)# " prompt, enter the following command and press <Enter>. As
show in Figure 98.
Switch(config)#
ip address 192.168.1.100 255.255.255.0
Switch(config)# ip default-gateway 192.168.1.254
The previous command would apply the follow settings for the Switch.
IP: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
Figure 98: Set IP address screen
2. Repeat Step 1 to check if the IP address has changed.
If the IP is successfully configured, the Managed Switch will apply the new IP address
setting immediately. You can access the Web interface of Managed Switch through
the new IP address.