GE DS-82 - Manual (Page 204)

Chapter 6: Command Line Interface
200 GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
show bind
Description:
Show Binding group information.
Syntax:
show bind [<1-220>]
Parameters:
<1-220> specifies the group id, null means all valid groups.
e.g. show bind 1
bind add
Description:
Add Binding group.
Syntax:
bind add <1-220> A:B:C:D:E:F <0-4094> A.B.C.D <1-26>
Parameters:
<1-220> specifies the group id.
A.B.C.D specifies the MAC address.
<0-4094> specifies the VLAN id. 0 means don't care.
A.B.C.D specifies the Source IP address. 0.0.0.0 means don't care.
A.B.C.D specifies the IP Address.
<1-26> specifies the Port id.
e.g.
Switch(config)# bind add 1 00:11:22:33:44:55 0 192.168.1.1 1
This Binding rule will permit all packet cross switch from device's IP is 192.168.1.1 and
MAC is 00:11:22:33:44:55 and this device connect to switch port id=1.