GE DS-82 - Manual (Page 73)

Chapter 4: Web-Based Management
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual 69
Figure 48: Port-based VLAN interface
Create a VLAN and add member ports to it
1. Click the hyperlink "VLAN" \ "Static VLAN" to enter the VLAN configuration
interface.
2. Select "Port Based VLAN" at the VLAN Operation Mode, to enable the port-
based VLAN function.
3. Click "Add" to create a new VLAN group. Figure 49 appears.
4. Type a name and Group ID for the new VLAN, the available range is 2-4094.
5. From the Available ports box, select ports to add to the Managed Switch and
click Add.
6. Click Apply.
7. You will see the VLAN Group displays.
8. If the port-based VLAN groups list over one page, please click "Next Page" to
view other VLAN groups on other page.
9. Use "Delete" button to delete unwanted port-based VLAN groups.
10. Use "Edit" button to modify existing port-based VLAN groups.
By adding ports to the VLAN you have created one port-based VLAN group
completely.