GE DS-82 - Manual (Page 79)

Chapter 4: Web-Based Management
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual 75
VLAN Filter
• 802.1Q VLAN Port Configuration
This page is used for configuring the Switch port VLAN. The VLAN per Port
Configuration page contains fields for managing ports that are part of a VLAN. The
port default VLAN ID (PVID) is configured on the VLAN Port Configuration page. All
untagged packets arriving to the device are tagged by the ports PVID.
This section provides 802.1Q Ingress Filter of each port from the Switch, the screen in
Figure 53 appears.
Figure 53: 802.1Q Ingress filter interface
This page includes the following fields:
OBJECT DESCRIPTION
NO Indicate port 1 to port 26.
PVID
Set the port VLAN ID that will be assigned to untagged traffic on a given
port. This feature is useful for accommodating devices that you want to
participate in the VLAN but that don't support tagging.
The switch each port allows user to set one VLAN ID, the range is 1-255,
default VLAN ID is 1.
The VLAN ID must as same as the VLAN ID that the port belong to VLAN
group, or the untagged traffic will be dropped.