GE DS-82 - Manual (Page 132)

Chapter 4: Web-Based Management
128 GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
After enabling the IEEE 802.1X function, you can configure the parameters of this
function.
Figure 89: 802.1x System Configuration interface
This page includes the following fields:
OBJECT DESCRIPTION
IEEE 802.1x Protocol: Enable or disable 802.1x protocol.
Radius Server IP: Assign the RADIUS Server IP address.
Server Port:
Set the UDP destination port for authentication requests to the
specified RADIUS Server.
Accounting Port:
Set the UDP destination port for accounting requests to the specified
RADIUS Server.
Shared Key:
Set an encryption key for using during authentication sessions with the
specified RADIUS server. This key must match the encryption key used
on the RADIUS Server.
NAS, Identifier: Set the identifier for the RADIUS client.
802.1x Port Configuration
In this page, you can select the specific port and configure the authorization state.
The state provides No Authorization, Force Authorized, Force unauthorized, and
Authorize.