Syslog setting, Port configuration – GE DS-82 User Manual
Page 60
Chapter 4: Web-Based Management
56
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
Syslog Setting
The Syslog Setting page allows you to configure the logging of messages that are
sent to remote syslog servers or other management stations. You can also limit the
event messages sent to only those messages below a specified level.
Figure 40: Syslog setting web interface
This page includes the following settings:
OBJECT DESCRIPTION
Syslog Server IP
IP address of syslog server.
Log level
None: never send syslog message to syslog serverme, and Max Age
parameters of the root bridge, regardless of how it is configured.
Major: only send major syslog to syslog server, eg: link up/down, system
warm/cold start
All: send all syslog message to syslog server.
Port Configuration
Port Control
In Port control you can configure the settings of each port to control the connection
parameters, and the status of each port is listed beneath.