GE GEK-106465A - Manual (Page 11)

PRODUCT DESCRIPTION
10 CIO Remote CAN Digital I/O Module GEK-106465A
2.3. ORDERING CODE
CIO units are available in 1/3 19’’ rack, 6 units high, and it includes a power supply module and a communication
module, plus a maximum of two I/O modules. Each of these modules can be supplied in different versions, which
must be specified when ordering. The required information to detail the requested unit is shown on the table below:
TABLE 2-1 ORDERING CODE
CIO H - J - - - DESCRIPTION
I/O board 1 in slot H
1 16 digital inputs + 8 outputs
2 8 digital inputs + 8 outputs + 2 trip/close circuit supervision
circuits
4 32 digital inputs
5 16 digital inputs + 8 analog inputs
I/O board 1 in slot J
0 None
1 16 inputs + 8 outputs
4 32 digital inputs (See Note 1)
5 16 digital inputs + 8 analog inputs (See Note 1)
Auxiliary Voltage
LO 24-48 Vdc (range 19.2 - 57.6)
HI 110-250 Vdc (range 88-300)
120-230 Vac (range 96-250)
Environmental Protection
H Harsh (Chemical) environment conformal coating
(1) The digit selected for option J must be equal or higher than the digit selected for option H.
CIOH1J5**: is a valid selection
CIOH5J1**: is an invalid selection