GE GEK-106465A - Manual (Page 37)

I/O MODULES DESCRIPTION
36 CIO Remote CAN Digital I/O Module GEK-106465A
5.2.2. INPUTS/OUTPUTS STATUS
Signals associated to I/O boards are divided in several groups:
Input activation signals (Contact Inputs):
Contact input activation signals can be obtained at Actual > Status > Contact Inputs > Board X, being X the
corresponding I/O board. Depending on the I/O board, inputs are represented as follows:
TABLE 5-2: INPUT STATUS
INPUT STATUS
(X: board F, G, H, J)
MIXED BOARD
(TYPE 1)
SUPERVISION BOARD
(TYPE 2)
CONT IP_X_CC1 CC1 CC1
CONT IP_ X _CC2 CC2 CC2
CONT IP_ X _CC3 CC3 CC3
CONT IP_ X _CC4 CC4 CC4
CONT IP_ X _CC5 CC5 CC5
CONT IP_ X _CC6 CC6 CC6
CONT IP_ X _CC7 CC7 CC7
CONT IP_ X _CC8 CC8 CC8
CONT IP_ X _CC9 CC9 Va_COIL1
CONT IP_ X _CC10 CC10 Vb_COIL1
CONT IP_ X _CC11 CC11 Va_COIL2
CONT IP_ X _CC12 CC12 Vb_COIL2
CONT IP_ X _CC13 CC13 O7_SEAL
CONT IP_ X _CC14 CC14 O8_SEAL
CONT IP_ X _CC15 CC15 SUP_COIL1
CONT IP_ X _CC16 CC16 SUP_COIL2
The operation logic for supervision signals (board type 2) is detailed in section 3.3.2. in this manual.