Maytag W10445417B User Manual
Page 11
11
Installation spacing for recessed area
or closet installation
n
All dimensions show recommended and minimum spacing
allowed.
n
Additional spacing should be considered for ease of
installation and servicing.
n
Additional clearances might be required for wall, door, floor
moldings, and dryer venting.
n
Additional spacing should be considered on all sides of the
dryer to reduce noise transfer.
n
For closet installation with a door, minimum ventilation
openings in the top and bottom of the door are required.
Louvered doors with equivalent ventilation openings are
acceptable.
n
Companion appliance spacing should also be considered.
1"
(25 mm)
3"
(76 mm)
24 in.
2
(155 cm
2
)
48 in.
2
(310 cm
2
)
3"
(76 mm)
3"
(76 mm)
1"
(25 mm)
9"
(229 mm)
18" min
(457 mm)
Recessed or closet installation (dryer only):
Mobile home - Additional installation requirements:
This dryer is suitable for mobile home installations.
The installation must conform to the Manufactured
Home Construction and Safety Standard, Title 24 CFR,
Part 3280 (formerly the Federal Standard for Mobile home
construction and Safety, Title 24, HUD Part 280).
Mobile home installations require:
n
Metal exhaust system hardware, available for purchase
from your dealer.
n
Special provisions must be made in mobile homes to
introduce outside air into dryer. Openings (such as a nearby
window) should be at least twice as large as dryer exhaust
opening.
Custom undercounter installation (dryer only):
1"
(25 mm)
1"
(25 mm)
33
1
/
4
"
(845 mm)
1"
(25 mm)
5
1
/
4
"
(133 mm)
24 in.
2
(155 cm
2
)
48 in.
2
(310 cm
2
)
3"
(76 mm)
3"
(76 mm)
65
3
/
4
"
(1670 mm)
12"
(305 mm)
1"
(25 mm)
Recessed or closet installation –
Stacked with stack kit: