Maytag W10445417B - Manual (Page 4)

4
CONTROL PANEL AND FEATURES
START BUTTON
Press to start a cycle. Indicator light will glow to indicate
the cycle has started.
TEMPERATURE BUTTON
The Temperature Control button lets you choose between
a normal and low drying temperature.
NOTE: Always refer to the care label on the garment to
determine whether it can be tumble dried.
Normal
The Normal temperature setting is for sturdy fabrics, such
as cotton, linen, and denim. If the Temperature Control
button is not pressed in, the temperature setting is Normal.
Low
The Low setting is for synthetics, such as cotton/polyester
blend, rayon, acetate, washable silk, or nylon. If the
Temperature Control button is pressed in, the temperature
setting is Low.
1
2 4
5
POWER BUTTON
Press to turn the dryer on and off. Indicator light will flash
to indicate the power is on.
CYCLE CONTROL KNOB
Use your dryer’s Cycle Control knob to select available
cycles on your dryer. Turn the knob to select a cycle for
your laundry load. Indicator light will flash to indicate a
cycle has been selected. See “Cycle Guide” for detailed
descriptions of cycles.
POWER INDICATOR
This light flashes when the power is on and glows when a
cycle is running.
1
2
3
4
5
3
END OF CYCLE SIGNAL
The dryer sounds a signal to let you know when the cycle is
complete. The signal is not adjustable and cannot be turned off.
The signal is helpful when you are drying permanent press,
synthetics, and other items that should be removed promptly
at the end of the cycle.
OPERATING INSTRUCTIONS