Motorola ME4066 Series - Manual (Page 10)

17
U
si
n
g
t
h
e
Te
le
p
h
o
n
e
18
U
si
n
g
t
h
e
Te
le
p
h
o
n
e
Note: If an external call is received during an internal call, short acoustic signals are
issued (call waiting).
1.
2.
3. Press the key.
Press the number of the required handset (1..4).Carry out the conversation.
Press the key to end the call.
Making External Calls
There are two ways to dial a number, namely direct dialing or on-hook dialing.
Press the key and wait for the dialing tone.
Dial the telephone number and complete the call.
Press the key to end the call.
Direct dialing
On-hook dialing
Dial the telephone number.
Delete any incorrect entries by pressing the
key.
Press the key. The number entered is dialed and a
connection established. Carry out the conversation.
Press the key to end the call.
1.
2.
3.
1.
2.
3.
4.
If more than one handset is registered on the base station,
internal calls can be made free of charge.
Making Internal Calls
Press the key repeatedly until menu item LANGUAGE appears.
Press the
key to confirm the item.
Press or as often as necessary to select the required language.
Press the
key to confirm the selection.
Ten different languages are available for selection for each handset.
Proceed as follows to select a language:
Selecting the Language
1.
2.
3.
4.
Switching the Handset On/Off and Display Illumination
When the handset is placed on the base station or charging unit, it switches on
automatically and starts to charge up. Allow the batteries to be charged for 14 hours
without interruption the first time they are charged. The telephone does not have an
On/Off switch.
Note: The display illumination switches on automatically when the handset is
removed from the charging station or pressing any key. It also lights up when calls
are received. It goes out automatically when no key has been pressed for 10 seconds.
Hands-free Mode
There are two methods with which to have telephone conversations in hands-free
mode, namely using direct dialing or by switching over during the call.
Direct dialing
1. Dial the call number and press the key to start dialing.
2. Carry out the conversation.
3. Press the key to end the call.
Switching During a Call
1. Dial the call number and press the key to start dialing.
2. Carry out the conversation.
3. Press the key to switch hand-free mode on or off.
4. Press the key to end the call.