Motorola ME4066 Series - Manual (Page 11)

19
U
si
n
g
t
h
e
Te
le
p
h
o
n
e
20
U
si
n
g
t
h
e
Te
le
p
h
o
n
e
When an external call is received, all the handsets registered and the base station
ring.
Taking Calls
1.
2. Press the 0 key for two seconds.
Supplement the call number and press the key to establish a connection.
Note: The prefix number (e.g. an access code) must have been programmed beforehand.
Refer to "Handset Settings".
Press the key. Carry out the conversation.
Press the key to end the call.
Handset is not in the base station
1.
2.
1.
2.
3.
Take the handset from the base station; a connection is automatically established
(when the AUTO ANS function is active). Otherwise, press the key.
.
Carry out the conversation.
Press the key to end the call.
Handset is in the base station
Prefix Dialing
Press the key; the first entry in the phone book appears.
Press the or key to select the required subscriber from the phone book.
Alternatively, enter the first letter of the name required.
Press the key. The number is dialed. Carry out the conversation. 1.
2.
3.
Dialing from the Phone Book
If calls have been received in your absence, these are collected in the CALL LOG
memory when your telephone service has enabled this function.
Press the key as often as necessary until the CALL LOG menu appears.
Press the
key. Alternatively, press and hold the key.
Press the or keys to browse through the CALL LOG memory.
Press the key to return the call.
Or
1.
2.
3.
4.
Call Log Operations
B row se, Call B ack, Delete, S ave
Press and hold the key two seconds to delete one or all the entries. Selection
is made using the or key. Press the key.
Or
Press the key to enter the subscribers in the phone book.
Enter the name.
Press the
key.
Press the or key to select the normal ring or VIP ring.
Press the key.
5.
6.
7.
8.
9.
10.