Motorola ME4066 Series - Manual (Page 15)

27
H
an
d
se
t
S
et
ti
n
g
s
28
H
an
d
se
t
S
et
ti
n
g
s
Press the key as often as necessary until the HANDSET menu appears.
Press the
key.
Press the or key to select the HS NAME submenu.
Press the
key.
Enter/Change the name of the handset (e.g. MOBIL 1).
1.
2.
3.
4.
5.
6. Press the key to confirm.
Note: To enter the characters, press the relevant key the corresponding number of
times, 1, 2, 3 or 4 times, according to the position on the key. Press the
5 key three times for an L, for example.
It is possible to save prefix numbers in the handset. This number is then recalled after
pressing the 0 key for two seconds.
Press the key as often as necessary until the HANDSET menu appears.
Press the
key.
Press the or key to select the PREFIX MEM submenu.
Press the
key.
Enter the prefix number (e.g. access code of the subscriber you call most frequently).
Press the
key to confirm.
Saving a Prefix
1.
2.
3.
4.
5.
6.
Switching the Key Tone On/Off
Press the key as often as necessary until the HANDSET menu appears.
Press the
key.
1.
2.
Activating/Deactivating Automatic Call Answering
The automatic call answering function enables the incoming call to be taken immediately
if the handset is removed from the base station. It is not necessary to press the call
key after removing the handset from the base station.
Press the key as often as necessary until the HANDSET menu appears.
Press the
key.
Press the or key to select the AUTO ANS submenu.
Press the
key.
Use the or key to switch automatic call answering on or off.
Press the
key to confirm.
1.
2.
3.
4.
5.
6.
Press the or key to select the KEY TONE.
Press the
key.
Press the or key to select the setting.
Press the
key to confirm.
3.
4.
5.
6.