Motorola ME4066 Series - Manual (Page 18)

33
B
as
e
S
ta
ti
o
n
S
et
ti
n
g
s
34
B
as
e
S
ta
ti
o
n
S
et
ti
n
g
s
Changing the PIN
Press the key as often as necessary until the BASE menu appears.
Press the
key.
Press the or as often as necessary to select the CHANGE PIN submenu.
Press the
key.
Enter the old PIN (0000).
Press the
key.
Enter the new PIN (e.g. 1111).
Press the
key.
Enter the new PIN again (e.g. 1111).
Press the
key.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Select Dial Mode
Press the key repeatedly until BASE appears.
Press the key.
Press the or key to select DIAL MODE.
Press the key.
Press the or key to select TONE or PULSE.
Press the key to confirm the selection. 1.
2.
3.
4.
5.
6.
Default Settings
Press the key as often as necessary until the BASE menu appears.
Press the
key.
Press the or as often as necessary to select the required DEFAULT submenu.
Enter the PIN.
Press the
key.
Press the key to confirm.
1.
2.
3.
4.
5.
6.
Press the key as often as necessary until the BASE menu appears.
Press the
key.
Press the or as often as necessary to select the DEREGISTER submenu.
Press the
key.
Enter the PIN. Note: (Factory setting is 0000).
Press the
key.
If necessary, use the or key to select the handset.
Press the
key.
Press the key to confirm the selection.
If several handsets are registered on one base station, they can deregister each other
mutually. The last handset cannot be deregistered.
Delete HS
1.
2.
3.
4.
5.
6.
7.
8.
9.