Motorola ME4066 Series - Manual (Page 12)

21
U
si
n
g
t
h
e
Te
le
p
h
o
n
e
22
U
si
n
g
t
h
e
Te
le
p
h
o
n
e
Note: 1. The CALL LOG symbol and display indicator only disappear after browsing
through all the entries. 2. It is only possible to enter subscribers in the phone book
who are not already entered.
Press the key to switch the microphone on
or off during a call.
Muting the Microphone
1.
If the telephone is connected to a PBX network, it is possible to put calls on hold and
call other extensions or to forward calls.
Press the key to put the call on hold.
Dial the number of the extensions (e.g. 23).
Press the key once more to take the call
back again or the key to forward the call.
Holding Calls / Forwarding Calls
1.
2.
3.
1.
2.
3.
4.
Press the key and enter the number of the
corresponding handset (e.g. 2) which should be included in the call.
The external caller is kept on hold. As soon as handset 2 takes the call, press
key to transfer the call to handset 2.
Or
The external caller is kept on hold. as soon as handset 2 takes the call, press and
hold key to activate the teleconference.
By pressing the key, any of the handsets can be disconnected from the
teleconference and the other handset continues with the external call.
After having received an external call, it is possible to include
a second handset in the conversation (three-way conference).
Teleconference and Intercom Call Transfering
Entering a Dialing Pause (P)
If the MOTOROLA telephone is connected to a PBX system, it may be
necessary to insert a dialing pause. To do this, press the key after entering the
relevant digit, e.g. 0, for an outside line (0P....). A 'P' appears in the display indicating
a pause. The pause can also be entered when programming numbers in the phone
book.