Marantz SR6003 User Manual

Page 40

Advertising
background image

ENGLISH

37

BASIC

CONNECTIONS

BASIC OPERA

TION

ADV

ANCED

CONNECTIONS

SETUP

ADV

ANCED

OPERA

TION

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTION

SETUP

4 VIDEO SETUP

Video settings are made as follows.

1.

Select “Video Setup” from the Main Menu

with the

3 or 4 cursor buttons and press the

ENTER button.

Video Setup

Video Convert

TV-Auto

OSD Information

Component I / P Convert

HDMI Output

HDMI Output Resolution

Return

: Up / Down

:

Enter : Select

Exit : Exit

: Disable

: Enable

: Disable

: Output1

: Auto

2.

Select the desired menu with the

3 or 4 cursor

buttons and press the ENTER button.

• Video Convert

This unit is equipped to convert video signals for
monitor output.
This section explains how to set up conversion for
each type of video input.

1.

Select “Video Setup” from the Main Menu

with the

3 or 4 cursor buttons and press the

ENTER button.

2.

Select “Video Convert” with the

3 or 4 cursor

buttons and press the ENTER button.

Video Convert

TV

DVD

VCR

DSS

AUX1

TAPE

CD/R

AUX2

Return

: Up / Down

: Change

Enter :

Exit : Exit

: Analog & HDMI

: Analog & HDMI

: Analog & HDMI

: Analog & HDMI

: Analog & HDMI

: Analog & HDMI

: Analog & HDMI

: Analog & HDMI

3.

Select “Function” with the

3 or 4 cursor buttons

and set the video conversion mode with the

1

or

2 cursor buttons

Analog&HDMI:

This mode both up-converts and down-converts
analog video signals (Composite Video, S-Video,
Component Video). Furthermore, it up-converts
from analog video signal to HDMI. (It cannot down-
convert from HDMI digital video signals to analog
video signals.)

Analog Only:

This mode both up-converts and down-converts
analog video signals (Composite Video, S-Video,
Component Video). It does not up-convert to
HDMI.

Off:
This mode turns off all conversion features.

Note:

• For details on video convert feature, see page 46.

• TV-Auto

Select the TV-Auto On/Off function to enable or
disable with the

1 or 2 cursor buttons. (refer to

page 45)

• OSD Information

Select the OSD information function to “Enable” or
Disable” with the

1 or 2 cursor buttons.

If you select “Enable”, this unit will display the
status of the feature (Volume up/down, input
select, etc..) on the monitor. If you do not desire
this information, select “Disable”.

Note:

• OSD information is not output to Monitor Output

of HDMI and Component Video. However, OSD
information is output if the Video Convert function
is used to output Video or S-Video video signals to
Monitor Out of HDMI and Component Video.

For details, refer to“Video Convert”on page 46.

• Component I/P Convert

Set whether or not to convert 480i signals to 480p
signals when outputting the analog video input
signal input from the VIDEO terminals, S-VIDEO
terminals, or COMPONENT terminals.
Select “Enable” or “Disable.”

Disable: Do not convert

Enable: Convert

Note:

This setting is enabled only when Video Convert is set
to other than Off.

• HDMI Output

This setting is for selecting which output terminal,
HDMI 1 or HDMI 2, to output the signal to. Select
the output destination with the

1 / 2 cursor

buttons.

• HDMI Output Resolution

Selects the resolution of the video signal output
from the HDMI terminal of this unit.
Select from the following using the

1 or 2 cursor

buttons.
AutoThrough480/576p720p1080i
1080pAuto

Advertising